logo-polimi
Loading...
Manifesto
Struttura Corso di Studi
Cerca/Visualizza Manifesto
Regolamento didattico
Internazionalizzazione
Orario Personalizzato
Il tuo orario personalizzato è disabilitato
Abilita
Ricerche
Cerca Docenti
Attività docente
Cerca Insegnamenti
Cerca insegnamenti degli Ordinamenti precedenti al D.M.509
Erogati in lingua Inglese
Le informazioni sulla didattica, sulla ricerca e sui compiti istituzionali riportate in questa pagina sono certificate dall'Ateneo; ulteriori informazioni, redatte a cura del docente, sono disponibili sulla pagina web personale e nel curriculum vitae indicati nella scheda.
Informazioni sul docente
DocenteGiglio Marco
QualificaProfessore ordinario a tempo pieno
Dipartimento d'afferenzaDipartimento di Meccanica
Settore Scientifico DisciplinareING-IND/14 - Progettazione Meccanica E Costruzione Di Macchine
Curriculum VitaeScarica il CV (207.53Kb - 09/10/2017)
OrcIDhttps://orcid.org/0000-0002-1909-0291

Contatti
Orario di ricevimento
DipartimentoPianoUfficioGiornoOrarioTelefonoFaxNote
Dipartimento di MeccanicaCampus Bovisa La Masa, Edificio B22MartedìDalle 15:15
Alle 16:15
+390223998234----
E-mailmarco.giglio@polimi.it
Pagina web redatta a cura del docentehttp://www.giglio.faculty.polimi.it/

Fonte dati: RE.PUBLIC@POLIMI - Research Publications at Politecnico di Milano

Elenco delle pubblicazioni e dei prodotti della ricerca per l'anno 2021 (Mostra tutto | Nascondi tutto)
Tipologia Titolo Pubblicazione/Prodotto
Contributo in Atti di convegno
An Impact Monitoring System for Aeronautical Structures (Mostra >>)
Damage Identification by Inverse Finite Element Method on Composite Structures Subject to Impact Damage (Mostra >>)
Investigation on low velocity impact damage identification with ultrasonic techniques under different sensor network conditions (Mostra >>)
Shape Sensing with Inverse Finite Element Method on a Composite Plate Under Compression Buckling (Mostra >>)
Articoli su riviste
A modified peridynamic method to model the fracture behaviour of nanocomposites (Mostra >>)
Comparison of strain pre-extrapolation techniques for shape and strain sensing by iFEM of a composite plate subjected to compression buckling (Mostra >>)
Effect of fibre bundle uncertainty on the tensile and shear behaviour of plain-woven composites (Mostra >>)
Experimental and numerical investigation on the perforation resistance of double-layered metal shield under high-velocity impact of armor-piercing projectiles (Mostra >>)
Experimental and numerical investigation on the perforation resistance of double-layered metal shields under high-velocity impact of soft-core projectiles (Mostra >>)
Fatigue crack propagation in a helicopter component subjected to impact damage (Mostra >>)
Finite Element Modelling of a Parabolic Trough Collector for Concentrated Solar Power (Mostra >>)
Numerical and experimental verification of an inverse-direct approach for load and strain monitoring in aeronautical structures (Mostra >>)
Shape sensing and damage identification with iFEM on a composite structure subjected to impact damage and non-trivial boundary conditions (Mostra >>)
Shape sensing of a complex aeronautical structure with inverse finite element method (Mostra >>)


Elenco delle pubblicazioni e dei prodotti della ricerca per l'anno 2020 (Mostra tutto | Nascondi tutto)
Tipologia Titolo Pubblicazione/Prodotto
Contributo in Atti di convegno
A cohesive-based method to bridge the strain rate effect and defects of RTM-6 epoxy resin under tensile loading (Mostra >>)
Anomaly identification in mechanical structures exploiting the inverse finite element method (ECCM -ECFD 2018 conference) (Mostra >>)
Material model characterization of a Ti/SiC metal matrix nanocomposite coating subjected to hypervelocity impact (Mostra >>)
Articoli su riviste
An investigation into mechanical properties of the nanocomposite with aligned CNT by means of electrical conductivity (Mostra >>)
Analytical and numerical modelling of high-velocity impact on multilayer alumina/aramid fiber composite ballistic shields: Improvement in modelling approaches (Mostra >>)
Calibration of the material parameters of a CFRP laminate for numerical simulations (Mostra >>)
Damage diagnosis and prognosis in composite double cantilever beam coupons by particle filtering and surrogate modelling (Mostra >>)
FE coupled to SPH numerical model for the simulation of high-velocity impact on ceramic based ballistic shields (Mostra >>)
Fatigue damage diagnosis and prognosis of an aeronautical structure based on surrogate modelling and particle filter (Mostra >>)
Global reliability sensitivity analysis by Sobol-based dynamic adaptive kriging importance sampling (Mostra >>)
Laser scanner-based 3D digitization for the reflective shape measurement of a parabolic trough collector (Mostra >>)
Numerical modeling of the tool-rock penetration process using FEM coupled with SPH technique (Mostra >>)
Numerical study of static and dynamic fracture behaviours of neat epoxy resin (Mostra >>)
On the evaluation of a coupled sequential approach for rotorcraft landing simulation (Mostra >>)


Elenco delle pubblicazioni e dei prodotti della ricerca per l'anno 2019 (Mostra tutto | Nascondi tutto)
Tipologia Titolo Pubblicazione/Prodotto
Contributo in Atti di convegno
A comparison of state-based peridynamics and solid mesh to SPH conversion techniques to reproduce fragmentation of a ceramic tile subject to ballistic impact (Mostra >>)
Adaptive training of neural networks by a particle filter for prognosis of damaged structures (Mostra >>)
An enhanced material model for the simulation of high-velocity impact on fiber-reinforced composites (Mostra >>)
Damage diagnosis and prognosis in a composite structure by surrogate modelling and particle filtering (Mostra >>)
Experimental testing and numerical modelling of a Kevlar woven - Epoxy matrix composite subjected to a punch test (Mostra >>)
Full field reconstruction in aeronautical structures subjected to aerodynamic loads by a matrix-based load monitoring algorithm (Mostra >>)
IMPACT DAMAGE IDENTIFICATION IN A COMPOSITE STRUCTURE BY SURROGATE MODELLING AND MARKOV-CHAIN MONTE-CARLO METHOD (Mostra >>)
Low velocity impact response of R-glass/epoxy composites produced by vacuum infusion (Mostra >>)
Modelling and experimental testing of thick CFRP composites subjected to low velocity impacts (Mostra >>)
The effect of mesh morphologies on the mesoscale Finite Element modelling of woven composites (Mostra >>)
Articoli su riviste
Analytical Model of High-Velocity Impact of a Deformable Projectile Against Textile-Based Composites (Mostra >>)
Ballistic strain-rate-dependent material modelling of glass-fibre woven composite based on the prediction of a meso-heterogeneous approach (Mostra >>)
Characterization of the 3M Scotch-Weld™ 7260 B/A epoxy adhesive by cohesive damage models and application to a full-scale bonded sub-structure (Mostra >>)
Definition of a load adaptive baseline by inverse finite element method for structural damage identification (Mostra >>)
Effect of temperature on cohesive modelling of 3M Scotch-Weld™ 7260 B/A epoxy adhesive (Mostra >>)
Experimental investigation on the mechanical behavior of an innovative parabolic trough collector (Mostra >>)
Influence of projectile and thickness on the ballistic behavior of aramid composites: Experimental and numerical study (Mostra >>)
Investigation about the structural nonlinearities of an aircraft pylon (Mostra >>)
Investigation of mechanical behaviour of a quasi-brittle material using Karagozian and Case concrete (KCC) model (Mostra >>)
On the performance of a cointegration-based approach for novelty detection in realistic fatigue crack growth scenarios (Mostra >>)
Particle filtering-based adaptive training of neural networks for real-time structural damage diagnosis and prognosis (Mostra >>)
Robust identification of strain waves due to low-velocity impact with different impactor stiffness (Mostra >>)
State-of-life prognosis and diagnosis of lithium-ion batteries by data-driven particle filters (Mostra >>)


Elenco delle pubblicazioni e dei prodotti della ricerca per l'anno 2018 (Mostra tutto | Nascondi tutto)
Tipologia Titolo Pubblicazione/Prodotto
Contributo in Atti di convegno
A DATA-DRIVEN PARTICLE FILTER FOR LITHIUM-ION BATTERIES STATE-OF-LIFE PROGNOSIS (Mostra >>)
A combined framework for automated diagnosis and prognosis based on surrogate modelling and a particle filter (Mostra >>)
ANOMALY IDENTIFICATION IN MECHANICAL STRUCTURES EXPLOITING THE INVERSE FINITE ELEMENT METHOD (Mostra >>)
Comparison of non-destructive techniques for impact damage area assessment in aramid/epoxy composites (Mostra >>)
Evaluation of the effects of the numerical modelling choices on the simulation of a tensile test on CFRP composite (Mostra >>)
Impact induced strain wave detection using a robust feature extraction method (Mostra >>)
Load adaptive baseline by inverse finite element method for structural damage identification (Mostra >>)
Microstructural numerical modeling of Al 2 O 3 /Ti composite (Mostra >>)
Surrogate modelling for observation likelihood calculation in a particle filter framework for automated diagnosis and prognosis (Mostra >>)
Two different modelling approaches for fabric composites subjected to ballistic impact (Mostra >>)
Articoli su riviste
A Bayesian framework for fatigue life prediction of composite laminates under co-existing matrix cracks and delamination (Mostra >>)
An analytical model for ballistic impacts against ceramic tiles (Mostra >>)
Analytical model of the dynamic behaviour of CFRP plates subjected to low-velocity impacts (Mostra >>)
Anti-icing and de-icing coatings based Joule's heating of graphene nanoplatelets (Mostra >>)
Experiments on the combined use of a double-sided pressure-sensitive tape and an epoxy adhesive to reduce handling time (Mostra >>)
Modeling the effects of tolerances and assembly errors on the optical performances of parabolic collectors in a concentrating solar power system (Mostra >>)
Optimization of nonlinear, non-Gaussian Bayesian filtering for diagnosis and prognosis of monotonic degradation processes (Mostra >>)
Testing and numerical simulation of a medium strength rock material under unconfined compression loading (Mostra >>)


Elenco delle pubblicazioni e dei prodotti della ricerca per l'anno 2017 (Mostra tutto | Nascondi tutto)
Tipologia Titolo Pubblicazione/Prodotto
Contributo in Atti di convegno
AN INVESTIGATION IN HI-FI FINITE ELEMENT MODELLING AIMED TO IMPROVE LCO PREDICTION (Mostra >>)
Adaptive prognosis of fatigue damage based on the combination of particle filters and neural networks (Mostra >>)
Analysis of a Helicopter Main Gearbox by means of Numerical Modelling approach (Mostra >>)
INVESTIGATING THE TENSILE FRACTURE BEHAVIOUR OF A MIDDLE STRENGTH ROCK: EXPERIMENTAL TESTS AND NUMERICAL MODELS (Mostra >>)
Investigation on the unconfined compression strength of rocks by experimental tests and advanced numerical modelling technique (Mostra >>)
Robust identification of low velocity impact events under different impactor stiffness (Mostra >>)
The numerical modelling of a middle strength rock material under Flexural test by Finite Element method-coupled to-SPH (Mostra >>)
Articoli su riviste
A particle filter-based model selection algorithm for fatigue damage identification on aeronautical structures (Mostra >>)
Adaptive prognosis of lithium-ion batteries based on the combination of particle filters and radial basis function neural networks (Mostra >>)
An investigation of strain energy release rate models for real-time prognosis of fiber-reinforced laminates (Mostra >>)
Feasibility study of a multi-parameter probability of detection formulation for a Lamb waves-based structural health monitoring approach to light alloy aeronautical plates (Mostra >>)
Four-point bending test on a middle strength rock: Numerical and experimental investigations (Mostra >>)
On the mechanical response of CFRP composite with embedded optical fibre when subjected to low velocity impact and CAI tests (Mostra >>)
Performance qualification of an on-board model-based diagnostic system for fatigue crack monitoring (Mostra >>)
Strain wave acquisition by a fiber optic coherent sensor for impact monitoring (Mostra >>)
manifesti v. 3.4.18 / 3.4.18
Area Servizi ICT
28/10/2021