With this function you can construct your weekly calendar of lessons, which is customized on the basis of the courses that you intend to follow.
Warning: the personal schedule does not replace the presentation of the study plan! It's an informal tool that can help you better manage the organization of class attendance before the study plan presentation.
After the study plan presentation we recommend you to use the Lecture timetable service in your Online Services.
To create your customized schedule follow these instructions:
- Click on the "Enable" link to proceed. You will be asked your surname and first name in order to determine your alphabetic grouping.
-
To add or remove courses from your personal schedule, use the small icons which are found next to the courses:
 addition of the course removal of the course selection of the section of the Laboratory of Architecture
(Note: the effective area in which the teaching will be carried out will be determined after the presentation of the Study Plans)
-
The sidebar on the left displays the number of lessons included in schedule.
There are also these commands:
 View the schedule: allows the viewing of the weekly synoptic schedule Delete the schedule: cancels the selections made
When you have finished the entry, you can print the calendar you have made.
| Semester (Sem) | | 1 | First Semester | | 2 | Second Semester | | A | Annual course | | (1) | First Half-semester | | (2) | Second Half-semester |
|
Language
|
|
|
Course completely offered in italian
|
|
|
Course completely offered in english
|
|
--
|
Not available
|
|
Note on the teaching activities
|
The calculation of the number of students enrolled only considers students enrolled in the academic year in question and does not include any possible students who may be attending but who are enrolled in previous academic years.
In case of structured courses taught by more professors, the number of students enrolled is related to the individual professor module, while the students opinion of the teaching is related to the course as a whole.
The data related to the last academic years (number of students enrolled and students opinion of the teaching) have not yet been defined.
|
|
Information on didactic, research and institutional assignments on this page are certified by the University; more information, prepared by the professor, are available on the personal web page and in the curriculum vitae indicated on this webpage.
| List of publications and reserach products for the year 2023 (Show all details | Hide all details) |
| Type |
Title of the Publicaiton/Product |
| Journal Articles |
|
Design of additively manufactured moulds for expanded polymers (Show >>)(Hide <<)
|
| Author/s |
Alessio, F.; Alessio, M.; Savoldelli, P.; Vedani, M.; Vigano', R. |
| Title of the review |
THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (ISSN: 1433-3015) |
| Volume |
125 |
| Brochure |
11-12 |
| Pages |
4899 - 4908 |
| Item link |
http://hdl.handle.net/11311/1231678 |
|
|
Hybrid laser metal deposition of a Fe–Cr–Mo–V–Mn tool steel for hot stamping applications (Show >>)(Hide <<)
|
| Author/s |
Romano, T.; Abdelwahed, M.; Bengtsson, S.; Bruzzo, F.; Casati, R.; Gedda, H.; Lopez, E.; Ulfberg, P.; Wilsnack, C.; Vedani, M. |
| Title of the review |
PROGRESS IN ADDITIVE MANUFACTURING (ISSN: 2363-9520) |
| Volume |
online version |
| Brochure |
-- |
| Pages |
1 - 16 |
| Item link |
http://hdl.handle.net/11311/1231673 |
|
|
Influence of ECAP process on mechanical, corrosion and bacterial properties of Zn-2Ag alloy for wound closure devices (Show >>)(Hide <<)
|
| Author/s |
García-Mintegui, Claudia; S., Goncharov Ivan; Ortiz-Membrado, Laia; Jiménez-Piqué, Emilio; Ginebra, Maria-Pau; Vedani, Maurizio; Cortina, José Luís; Pegueroles, Marta |
| Title of the review |
MATERIALS & DESIGN (ISSN: 0264-1275) |
| Volume |
228 |
| Brochure |
-- |
| Pages |
1 - 35 |
| Item link |
http://hdl.handle.net/11311/1232403 |
|
| List of publications and reserach products for the year 2022 (Show all details | Hide all details) |
| Type |
Title of the Publicaiton/Product |
| Conference proceedings |
|
Development of Al-Cu-Mg and Al-Mg-Si-Zr Alloys with Improved L-PBF Processability (Show >>)(Hide <<)
|
| Author/s |
Belelli, F; Casati, R; Vedani, M |
| Title of the convention |
151st Annual Meeting and Exhibition of The Minerals, Metals and Materials Society, TMS 2022 |
| Location of the convention |
online |
| Title of the review |
--
|
| Pages |
289 - 297 |
| Item link |
http://hdl.handle.net/11311/1203736 |
|
|
Geometrical Issues in Design for Binder Jetting - The Effect of Anisotropic Dimensional Change on Sintering (Show >>)(Hide <<)
|
| Author/s |
Zago, M; Lecis, Nfm; Vedani, M; Cristofolini, I |
| Title of the convention |
ADM 2021 |
| Location of the convention |
Roma |
| Title of the review |
--
|
| Pages |
410 - 421 |
| Item link |
http://hdl.handle.net/11311/1232816 |
|
| Journal Articles |
|
An investigation on the plane-strain fracture toughness of a water atomized 4130 low-alloy steel processed by laser powder bed fusion (Show >>)(Hide <<)
|
| Author/s |
Abdelwahed, M; Bengtsson, S; Boniardi, M; Casaroli, A; Casati, R; Vedani, M |
| Title of the review |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ISSN: 0921-5093) |
| Volume |
855 |
| Brochure |
-- |
| Pages |
1 - 11 |
| Item link |
http://hdl.handle.net/11311/1228628 |
|
|
Corrosion behavior of as-cast magnesium-4 % zinc alloys in simulated body fluid solution: the influence of minor calcium and manganese addition|Korrosionsverhalten von Magnesium-4 %Zink-Legierungen im Gusszustand in simulierter Körperflüssigkeitslösung: Einfluss eines geringen Calcium- und Manganzusatzes (Show >>)(Hide <<)
|
| Author/s |
Yu, J.; Wang, L.; Wang, Y.; Cao, X.; Li, Y.; Xing, B.; Lu, L.; Cheng, W.; Wang, H.; Shin, K. S.; Vedani, M. |
| Title of the review |
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (ISSN: 0933-5137) |
| Volume |
53 |
| Brochure |
7 |
| Pages |
819 - 834 |
| Item link |
http://hdl.handle.net/11311/1231671 |
|
|
Densification behaviour of pure copper processed through cold pressing and binder jetting under different atmospheres (Show >>)(Hide <<)
|
| Author/s |
Romano, T.; Migliori, E.; Mariani, M.; Lecis, N.; Vedani, M. |
| Title of the review |
RAPID PROTOTYPING JOURNAL (ISSN: 1355-2546) |
| Volume |
28 |
| Brochure |
6 |
| Pages |
1023 - 1039 |
| Item link |
http://hdl.handle.net/11311/1219293 |
|
|
Design and Characterization of Al–Mg–Si–Zr Alloys with Improved Laser Powder Bed Fusion Processability (Show >>)(Hide <<)
|
| Author/s |
Belelli, F.; Casati, R.; Vedani, M.; Volpp, J. |
| Title of the review |
METALLURGICAL AND MATERIALS TRANSACTIONS. A, PHYSICAL METALLURGY AND MATERIALS SCIENCE (ISSN: 1073-5623) |
| Volume |
53 |
| Brochure |
1 |
| Pages |
331 - 343 |
| Item link |
http://hdl.handle.net/11311/1203733 |
|
|
Effect of Cu content on hot-crack resistance of Al-Cu-Mg alloys produced by laser powder bed fusion (Show >>)(Hide <<)
|
| Author/s |
Belelli, F.; Casati, R.; Vedani, M. |
| Title of the review |
PHILOSOPHICAL MAGAZINE LETTERS (ISSN: 0950-0839) |
| Volume |
102 |
| Brochure |
3 |
| Pages |
111 - 119 |
| Item link |
http://hdl.handle.net/11311/1203735 |
|
|
Effect of annealing temperature on microstructure and high-temperature tensile behaviour of Ti-6242S alloy produced by Laser Powder Bed Fusion (Show >>)(Hide <<)
|
| Author/s |
Casati, Riccardo; Boari, Gabriele; Rizzi, Alessandro; Vedani, Maurizio |
| Title of the review |
EUROPEAN JOURNAL OF MATERIALS (ISSN: 2688-9277) |
| Volume |
1 |
| Brochure |
-- |
| Pages |
72 - 83 |
| Item link |
http://hdl.handle.net/11311/1228523 |
|
|
Effect of residual tensile stress and crystallographic structure on corrosion behavior of AZ31 Mg alloy rolled sheets (Show >>)(Hide <<)
|
| Author/s |
Wang, Lf; Lu, Y; Chai, H; Huang, Gs; Fu, Xw; Cao, Xq; Zhang, H; Wang, Hx; Vedani, M |
| Title of the review |
MATERIALS TODAY COMMUNICATIONS (ISSN: 2352-4928) |
| Volume |
32 |
| Brochure |
-- |
| Pages |
1 - 11 |
| Item link |
http://hdl.handle.net/11311/1233172 |
|
|
Effect of silver in thermal treatments of Fe-Mn-C degradable metals: Implications for stent processing (Show >>)(Hide <<)
|
| Author/s |
Loffredo, S.; Gambaro, S.; Copes, F.; Paternoster, C.; Giguere, N.; Vedani, M.; Mantovani, D. |
| Title of the review |
BIOACTIVE MATERIALS (ISSN: 2452-199X) |
| Volume |
12 |
| Brochure |
-- |
| Pages |
30 - 41 |
| Item link |
http://hdl.handle.net/11311/1214334 |
|
|
Investigation and characterization of an Al-Mg-Zr-Sc alloy with reduced Sc content for laser powder bed fusion (Show >>)(Hide <<)
|
| Author/s |
Belelli, F.; Casati, R.; Andrianopoli, C.; Cuccaro, F.; Vedani, M. |
| Title of the review |
JOURNAL OF ALLOYS AND COMPOUNDS (ISSN: 0925-8388) |
| Volume |
924 |
| Brochure |
-- |
| Pages |
1 - 13 |
| Item link |
http://hdl.handle.net/11311/1228624 |
|
|
Low cycle fatigue behavior of wire arc additive manufactured and solution annealed 308 L stainless steel (Show >>)(Hide <<)
|
| Author/s |
Li, Y.; Yuan, Y.; Wang, D.; Fu, S.; Song, D.; Vedani, M.; Chen, X. |
| Title of the review |
ADDITIVE MANUFACTURING (ISSN: 2214-8604) |
| Volume |
52 |
| Brochure |
-- |
| Pages |
1 - 13 |
| Item link |
http://hdl.handle.net/11311/1214349 |
|
|
On the Recycling of Water Atomized Powder and the Effects on Properties of L-PBF Processed 4130 Low-Alloy Steel (Show >>)(Hide <<)
|
| Author/s |
Abdelwahed, M.; Casati, R.; Larsson, A.; Petrella, S.; Bengtsson, S.; Vedani, M. |
| Title of the review |
MATERIALS (ISSN: 1996-1944) |
| Volume |
15 |
| Brochure |
1 |
| Pages |
1 - 9 |
| Item link |
http://hdl.handle.net/11311/1203734 |
|
|
Twinning and dynamic recrystallization behaviors during inchoate deformation of pre-twinned AZ31 Mg alloy sheet at elevated temperatures (Show >>)(Hide <<)
|
| Author/s |
Pan, Xh; Wang, Lf; Li, Yq; Xue, Ll; Lu, Pb; Huang, Gs; Xing, B; Zheng, Lw; Wang, Hx; Qi, Fg; Vedani, M |
| Title of the review |
JOURNAL OF ALLOYS AND COMPOUNDS (ISSN: 0925-8388) |
| Volume |
917 |
| Brochure |
-- |
| Pages |
1 - 15 |
| Item link |
http://hdl.handle.net/11311/1233171 |
|
| List of publications and reserach products for the year 2021 (Show all details | Hide all details) |
| Type |
Title of the Publicaiton/Product |
| Journal Articles |
|
Beta Titanium Alloys Processed By Laser Powder Bed Fusion: A Review (Show >>)(Hide <<)
|
| Author/s |
Colombo-Pulgarin, J. C.; Biffi, C. A.; Vedani, M.; Celentano, D.; Sanchez-Egea, A.; Boccardo, A. D.; Ponthot, J. -P. |
| Title of the review |
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (ISSN: 1059-9495) |
| Volume |
30 |
| Brochure |
9 |
| Pages |
6365 - 6388 |
| Item link |
http://hdl.handle.net/11311/1214357 |
|
|
Comparative thermal fatigue behavior of AlSi7Mg alloy produced by L-PBF and sand casting (Show >>)(Hide <<)
|
| Author/s |
Sajedi, Z.; Casati, R.; Poletti, M. C.; Wang, R.; Iranshahi, F.; Vedani, M. |
| Title of the review |
INTERNATIONAL JOURNAL OF FATIGUE (ISSN: 0142-1123) |
| Volume |
152 |
| Brochure |
-- |
| Pages |
1 - 15 |
| Item link |
http://hdl.handle.net/11311/1203695 |
|
|
Development of a novel high-temperature al alloy for laser powder bed fusion (Show >>)(Hide <<)
|
| Author/s |
Belelli, F.; Casati, R.; Riccio, M.; Rizzi, A.; Kayacan, M. Y.; Vedani, M. |
| Title of the review |
METALS (ISSN: 2075-4701) |
| Volume |
11 |
| Brochure |
1 |
| Pages |
1 - 12 |
| Item link |
http://hdl.handle.net/11311/1158926 |
|
|
Effect of Heat Treatment on Microstructure Evolution of X38CrMoV5-1 Hot-Work Tool Steel Produced by L-PBF (Show >>)(Hide <<)
|
| Author/s |
Carasi, Gregorio; Yu, Bosco; Hutten, Esther; Zurob, Hatem; Casati, Riccardo; Vedani, Maurizio |
| Title of the review |
METALLURGICAL AND MATERIALS TRANSACTIONS. A, PHYSICAL METALLURGY AND MATERIALS SCIENCE (ISSN: 1073-5623) |
| Volume |
Published online April 2021 |
| Brochure |
-- |
| Pages |
1 - 12 |
| Item link |
http://hdl.handle.net/11311/1168678 |
|
|
Effect of water atomization on properties of type 4130 steel processed by L-PBF (Show >>)(Hide <<)
|
| Author/s |
Abdelwahed, M.; Bengtsson, S.; Casati, R.; Larsson, A.; Petrella, S.; Vedani, M. |
| Title of the review |
MATERIALS & DESIGN (ISSN: 0264-1275) |
| Volume |
210 |
| Brochure |
-- |
| Pages |
1 - 16 |
| Item link |
http://hdl.handle.net/11311/1203701 |
|
|
Effects of process parameters, debinding and sintering on the microstructure of 316L stainless steel produced by binder jetting (Show >>)(Hide <<)
|
| Author/s |
Lecis, N.; Mariani, M.; Beltrami, R.; Emanuelli, L.; Casati, R.; Vedani, M.; Molinari, A. |
| Title of the review |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ISSN: 0921-5093) |
| Volume |
828 |
| Brochure |
-- |
| Pages |
1 - 12 |
| Item link |
http://hdl.handle.net/11311/1195478 |
|
|
Fatigue performance of an additively manufactured zr-based bulk metallic glass and the effect of post-processing (Show >>)(Hide <<)
|
| Author/s |
Sohrabi, N.; Hamidi-Nasab, M.; Rouxel, B.; Jhabvala, J.; Parrilli, A.; Vedani, M.; Loge, R. E. |
| Title of the review |
METALS (ISSN: 2075-4701) |
| Volume |
11 |
| Brochure |
7 |
| Pages |
1 - 19 |
| Item link |
http://hdl.handle.net/11311/1214367 |
|
|
First proof-of-concept prototype of an additive manufactured radio frequency quadrupole (Show >>)(Hide <<)
|
| Author/s |
Torims, T.; Pikurs, G.; Gruber, S.; Vretenar, M.; Ratkus, A.; Vedani, M.; Lopez, E.; Bruckner, F. |
| Title of the review |
INSTRUMENTS (ISSN: 2410-390X) |
| Volume |
5 |
| Brochure |
4 |
| Pages |
1 - 12 |
| Item link |
http://hdl.handle.net/11311/1214352 |
|
|
Insight into the effect of different thermal treatment routes on the microstructure of AlSi7Mg produced by laser powder bed fusion (Show >>)(Hide <<)
|
| Author/s |
Casati, R.; Coduri, M.; Checchia, S.; Vedani, M. |
| Title of the review |
MATERIALS CHARACTERIZATION (ISSN: 1044-5803) |
| Volume |
172 |
| Brochure |
-- |
| Pages |
1 - 7 |
| Item link |
http://hdl.handle.net/11311/1158923 |
|
|
Interface analysis of additively manufactured pure molybdenum and AISI 304 stainless steel building-plate (Show >>)(Hide <<)
|
| Author/s |
Rebesan, P.; Gennari, C.; Zorzi, F.; Bonesso, M.; Calliari, I.; Dima, R.; Pepato, A.; Vedani, M. |
| Title of the review |
MATERIALS LETTERS (ISSN: 0167-577X) |
| Volume |
305 |
| Brochure |
-- |
| Pages |
1 - 4 |
| Item link |
http://hdl.handle.net/11311/1214351 |
|
|
Investigation on two Ti–B-reinforced Al alloys for Laser Powder Bed Fusion (Show >>)(Hide <<)
|
| Author/s |
Belelli, F.; Casati, R.; Larini, F.; Riccio, M.; Vedani, M. |
| Title of the review |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ISSN: 0921-5093) |
| Volume |
808 |
| Brochure |
-- |
| Pages |
1 - 12 |
| Item link |
http://hdl.handle.net/11311/1168676 |
|
|
L-PBF Processing of Steel Powders Produced by Gas and Water Atomization (Show >>)(Hide <<)
|
| Author/s |
Abdelwahed, M.; Bengsston, S.; Casati, R.; Larsson, A.; Vedani, M. |
| Title of the review |
BHM. BERG- UND HUTTENMANNISCHE MONATSHEFTE (ISSN: 0005-8912) |
| Volume |
2021 |
| Brochure |
-- |
| Pages |
1 - 6 |
| Item link |
http://hdl.handle.net/11311/1158938 |
|
|
Mechanical and microstructural characterization of WC-Co consolidated by binder jetting additive manufacturing (Show >>)(Hide <<)
|
| Author/s |
Mariani, Marco; Goncharov, Ivan; Mariani, Davide; De Gaudenzi, Gian Pietro; Popovich, Anatoly; Lecis, Nora; Vedani, Maurizio |
| Title of the review |
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (ISSN: 0958-0611) |
| Volume |
100 |
| Brochure |
-- |
| Pages |
1 - 8 |
| Item link |
http://hdl.handle.net/11311/1181805 |
|
|
Pure molybdenum manufactured by Laser Powder Bed Fusion: Thermal and mechanical characterization at room and high temperature (Show >>)(Hide <<)
|
| Author/s |
Rebesan, P.; Ballan, M.; Bonesso, M.; Campagnolo, A.; Corradetti, S.; Dima, R.; Gennari, C.; Longo, G. A.; Mancin, S.; Manzolaro, M.; Meneghetti, G.; Pepato, A.; Visconti, E.; Vedani, M. |
| Title of the review |
ADDITIVE MANUFACTURING (ISSN: 2214-8604) |
| Volume |
47 |
| Brochure |
-- |
| Pages |
1 - 18 |
| Item link |
http://hdl.handle.net/11311/1214355 |
|
|
Six-Month Long in Vitro Degradation Tests of Biodegradable Twinning-Induced Plasticity Steels Alloyed with Ag for Stent Applications (Show >>)(Hide <<)
|
| Author/s |
Loffredo, S.; Gambaro, S.; Marin De Andrade, L.; Paternoster, C.; Casati, R.; Giguere, N.; Vedani, M.; Mantovani, D. |
| Title of the review |
ACS BIOMATERIALS SCIENCE & ENGINEERING (ISSN: 2373-9878) |
| Volume |
7 |
| Brochure |
8 |
| Pages |
3669 - 3682 |
| Item link |
http://hdl.handle.net/11311/1203687 |
|
| List of publications and reserach products for the year 2020 (Show all details | Hide all details) |
| Type |
Title of the Publicaiton/Product |
| Patents |
|
Coolant housing for an electric machine and electric machine (Show >>)(Hide <<)
|
| Author/s |
Forte, P.; Redaelli, E.; Pennati, S.; Zai, L.; Savoia, M.; Vedani, M.; Gariboldi, E. |
| Patent owner |
Politecnico di Milano, Eldor Corporation S.p.A. |
| Patent number |
PCT/IB2020/057131 |
| Item link |
http://hdl.handle.net/11311/1214723 |
|
|
MIXTURE OF PCM WAXES AS AN ELEMENT FOR ACCUMULATING LATENT HEAT IN ELECTRIC MACHINES (Show >>)(Hide <<)
|
| Author/s |
Vedani, M.; Gariboldi, E.; Pennati, S.; Redaelli, E.; Forte, P. |
| Patent owner |
Politecnico di Milano; Eldor |
| Patent number |
PCT/IB2020/057104 |
| Item link |
http://hdl.handle.net/11311/1176597 |
|
| Conference proceedings |
|
L-PBF processing of steel powders produced by gasa and water atomization (Show >>)(Hide <<)
|
| Author/s |
Abdelwahed, M.; Casati, R.; Vedani, M.; Bengsston, S.; Larsson, A. |
| Title of the convention |
MAMC Metal Additive Manufacturing Conference |
| Location of the convention |
Vienna/Virtual |
| Title of the review |
--
|
| Pages |
1 - 8 |
| Item link |
http://hdl.handle.net/11311/1169434 |
|
|
Strategies to design high-strength Al alloys with improved L-PBF processability (Show >>)(Hide <<)
|
| Author/s |
Belelli, F.; Casati, R.; Vedani, M.; Riccio, M.; Rizzi, A. |
| Title of the convention |
EURO PM2020 |
| Location of the convention |
Virtual |
| Title of the review |
--
|
| Pages |
1 - 4 |
| Item link |
http://hdl.handle.net/11311/1169425 |
|
|
TUNGSTEN AND MOLYBDENUM FABRICATED BY LASER POWDER BED FUSION (Show >>)(Hide <<)
|
| Author/s |
Rebesan, Pietro; Bonesso, Massimiliano; Gennari, Claudio; Vedani, Maurizio; Pepato, Adriano; Dima, Razvan |
| Title of the convention |
Metal Additive Manufacturing Conference - MAMC 2020 |
| Location of the convention |
Vienna |
| Period of the convention |
Wednesday 30 September 2020 - Friday 02 October 2020 |
| Title of the review |
--
|
| Pages |
183 - 192 |
| Item link |
http://hdl.handle.net/11311/1168672 |
|
| Journal Articles |
|
Combined effect of surface anomalies and volumetric defects on fatigue assessment of AlSi7Mg fabricated via laser powder bed fusion (Show >>)(Hide <<)
|
| Author/s |
Hamidi Nasab, M.; Romano, S.; Gastaldi, D.; Beretta, S.; Vedani, M. |
| Title of the review |
ADDITIVE MANUFACTURING (ISSN: 2214-8604) |
| Volume |
34 |
| Brochure |
-- |
| Pages |
1 - 14 |
| Item link |
http://hdl.handle.net/11311/1123002 |
|
|
Design and testing of an innovative 3D-printed metal-composite junction (Show >>)(Hide <<)
|
| Author/s |
Graziosi, S.; Cannazza, F.; Vedani, M.; Ratti, A.; Tamburrino, F.; Bordegoni, M. |
| Title of the review |
ADDITIVE MANUFACTURING (ISSN: 2214-8604) |
| Volume |
36 |
| Brochure |
-- |
| Pages |
1 - 18 |
| Item link |
http://hdl.handle.net/11311/1155870 |
|
|
Effects of powder atomisation on microstructural and mechanical behaviour of l-pbf processed steels (Show >>)(Hide <<)
|
| Author/s |
Abdelwahed, M.; Casati, R.; Bengtsson, S.; Larsson, A.; Riccio, M.; Vedani, M. |
| Title of the review |
METALS (ISSN: 2075-4701) |
| Volume |
10 |
| Brochure |
11 |
| Pages |
1 - 21 |
| Item link |
http://hdl.handle.net/11311/1158931 |
|
|
Microstructural precipitation evolution and in vitro degradation behavior of a novel chill-cast zn-based absorbable alloy for medical applications (Show >>)(Hide <<)
|
| Author/s |
Ramirez-Ledesma, A. L.; Roncagliolo-Barrera, P.; Paternoster, C.; Casati, R.; Lopez, H.; Vedani, M.; Mantovani, D. |
| Title of the review |
METALS (ISSN: 2075-4701) |
| Volume |
10 |
| Brochure |
5 |
| Pages |
1 - 20 |
| Item link |
http://hdl.handle.net/11311/1158935 |
|
|
Novel concepts for the design of moulds and equipment for expanded polymer bead foams (Show >>)(Hide <<)
|
| Author/s |
Alessio, F.; Alessio, M.; Vedani, M.; Vigano', R. |
| Title of the review |
PROGRESS IN ADDITIVE MANUFACTURING (ISSN: 2363-9512) |
| Volume |
Published online November 2020 |
| Brochure |
-- |
| Pages |
1 - 7 |
| Item link |
http://hdl.handle.net/11311/1166049 |
|
|
Review: Achieving enhanced plasticity of magnesium alloys below recrystallization temperature through various texture control methods (Show >>)(Hide <<)
|
| Author/s |
Wang, Lifei; Li, Yongqiao; Zhang, Hua; Zhang, Zhengyong; Yang, Qingshan; Zhang, Qiang; Wang, Hongxia; Cheng, Weili; Seon Shin, Kwang; Vedani, Maurizio |
| Title of the review |
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY (ISSN: 2238-7854) |
| Volume |
9 |
| Brochure |
6 |
| Pages |
12604 - 12625 |
| Item link |
http://hdl.handle.net/11311/1168675 |
|
|
Thermal fatigue testing of laser powder bed fusion (L-PBF) processed AlSi7Mg alloy in presence of a quasi-static tensile load (Show >>)(Hide <<)
|
| Author/s |
Sajedi, Z.; Casati, R.; Poletti, M. C.; Skalon, M.; Vedani, M. |
| Title of the review |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ISSN: 0921-5093) |
| Volume |
789 |
| Brochure |
-- |
| Pages |
1 - 10 |
| Item link |
http://hdl.handle.net/11311/1158933 |
|
| List of publications and reserach products for the year 2019 (Show all details | Hide all details) |
| Type |
Title of the Publicaiton/Product |
| Patents |
|
Involucro refrigerante per una macchina elettrica e macchina elettrica (Show >>)(Hide <<)
|
| Author/s |
Vedani, M.; Gariboldi, E.; Pennati, S.; Redaelli, E.; Forte, P. |
| Patent owner |
Politecnico di Milano, Eldor Corporation S.p.A. |
| Patent number |
102019000013146 |
| Item link |
http://hdl.handle.net/11311/1131210 |
|
|
Miscela di cere PCM come elemento di accumulo del calore latente in macchine elettriche (Show >>)(Hide <<)
|
| Author/s |
Gariboldi, E.; Vedani, M.; Pennati, S.; Redaelli, E.; Forte, P. |
| Patent owner |
Politecnico di Milano, Eldor Corporation S.p.A. |
| Patent number |
102019000013161 |
| Item link |
http://hdl.handle.net/11311/1131202 |
|
| Author/s |
Vedani, M.; Chatterton, S.; Pennacchi, P.; Lecis, N. |
| Patent owner |
Politecnico di Milano, Rosler |
| Patent number |
EP19205910.3 |
| Item link |
http://hdl.handle.net/11311/1176681 |
|
| Contributions on scientific books |
| Author/s of the contributin |
Mostaed, E.; Sikora-Jasinska, M.; &, ; Vedani, M. |
| Title of the book |
Encyclopedia of Biomedical Engineering (ISBN: 9780128048290) |
| Author/s of the book |
R. Narayan |
| Publisher |
Elsevier |
| Pages |
478 - 487 |
| Item link |
http://hdl.handle.net/11311/1123014 |
|
| Conference proceedings |
|
A Study on the Surface Features of the SLM Processed Parts and Their Journey to Become Bulk Defects (Show >>)(Hide <<)
|
| Author/s |
Nasab, M. H.; Boillat, E.; Logé, R. E.; Casati, R.; Vedani, M. |
| Title of the convention |
Euro PM2019 Congress & Exhibition |
| Location of the convention |
Maastricht, Paesi Bassi |
| Title of the review |
--
|
| Pages |
1 - 8 |
| Item link |
http://hdl.handle.net/11311/1121729 |
|
|
Design of structural low-alloy steels for Laser-powder bed fusion (Show >>)(Hide <<)
|
| Author/s |
Bengtsson, S.; Casati, R.; Larsson, A.; Riccio, M.; Abdelwahed, M.; Vedani, M. |
| Title of the convention |
Euro PM2019 Congress & Exhibition |
| Location of the convention |
Maastricht, Paesi Bassi |
| Title of the review |
--
|
| Pages |
1 - 8 |
| Item link |
http://hdl.handle.net/11311/1121733 |
|
|
Thermo-mechanical Fatigue Behaviour of AlSi7Mg Alloy Processed by Selective Laser Melting (Show >>)(Hide <<)
|
| Author/s |
Sajedi, Z.; Casati, R.; Poletti, M. C.; Skalon, M.; Sommitsch, C.; Vedani, M |
| Title of the convention |
Euro PM2019 Congress & Exhibition |
| Location of the convention |
Maastricht, Paesi Bassi |
| Title of the review |
--
|
| Pages |
1 - 7 |
| Item link |
http://hdl.handle.net/11311/1121728 |
|
| Journal Articles |
|
Aging Response of an A357 Al Alloy Processed by Selective Laser Melting (Show >>)(Hide <<)
|
| Author/s |
Casati, R.; Vedani, M. |
| Title of the review |
ADVANCED ENGINEERING MATERIALS (ISSN: 1527-2648) |
| Volume |
21 |
| Brochure |
4 |
| Pages |
1 - 7 |
| Item link |
http://hdl.handle.net/11311/1121724 |
|
|
Development of a high strength Al–Zn–Si–Mg–Cu alloy for selective laser melting (Show >>)(Hide <<)
|
| Author/s |
Casati, R.; Coduri, M.; Riccio, M.; Rizzi, A.; Vedani, M. |
| Title of the review |
JOURNAL OF ALLOYS AND COMPOUNDS (ISSN: 0925-8388) |
| Volume |
801 |
| Brochure |
-- |
| Pages |
243 - 253 |
| Item link |
http://hdl.handle.net/11311/1121722 |
|
|
Effect of Surface and Subsurface Defects on Fatigue Behavior of AlSi10Mg Alloy Processed by Laser Powder Bed Fusion (L-PBF) (Show >>)(Hide <<)
|
| Author/s |
HAMIDI NASAB, Milad; Giussani, Alessandro; Gastaldi, Dario; Tirelli, Valeria; Vedani, Maurizio |
| Title of the review |
METALS (ISSN: 2075-4701) |
| Volume |
9 |
| Brochure |
-- |
| Pages |
1 - 19 |
| Item link |
http://hdl.handle.net/11311/1123013 |
|
|
Hydrogen embrittlement behavior of 18Ni 300 maraging steel produced by selective laser melting (Show >>)(Hide <<)
|
| Author/s |
Kwon, Y. J.; Casati, R.; Coduri, M.; Vedani, M.; Lee, C. S. |
| Title of the review |
MATERIALS (ISSN: 1996-1944) |
| Volume |
12 |
| Brochure |
15 |
| Pages |
1 - 12 |
| Item link |
http://hdl.handle.net/11311/1121723 |
|
|
In Vitro Degradation of Absorbable Zinc Alloys in Artificial Urine (Show >>)(Hide <<)
|
| Author/s |
Champagne, Sébastien; Mostaed, Ehsan; Safizadeh, Fariba; Ghali, Edward; Vedani, Maurizio; Hermawan, Hendra |
| Title of the review |
MATERIALS (ISSN: 1996-1944) |
| Volume |
12 |
| Brochure |
2 |
| Pages |
1 - 13 |
| Item link |
http://hdl.handle.net/11311/1123009 |
|
|
The addition of silver affects the deformation mechanism of a twinninginduced plasticity steel: Potential for thinner degradable stents (Show >>)(Hide <<)
|
| Author/s |
Loffredo, Sergio; Paternoster, Carlo; Giguère, Nicolas; Barucca, Gianni; Vedani, Maurizio; Mantovani, Diego |
| Title of the review |
ACTA BIOMATERIALIA (ISSN: 1742-7061) |
| Volume |
98 |
| Brochure |
-- |
| Pages |
103 - 113 |
| Item link |
http://hdl.handle.net/11311/1123007 |
|
|
|
