logo-polimi
Loading...
Manifesto
Struttura Corso di Studi
Cerca/Visualizza Manifesto
Regolamento didattico
Internazionalizzazione
Orario Personalizzato
Il tuo orario personalizzato è disabilitato
Abilita
Ricerche
Cerca Docenti
Attività docente
Cerca Insegnamenti
Cerca insegnamenti degli Ordinamenti precedenti al D.M.509
Erogati in lingua Inglese
Le informazioni sulla didattica, sulla ricerca e sui compiti istituzionali riportate in questa pagina sono certificate dall'Ateneo; ulteriori informazioni, redatte a cura del docente, sono disponibili sulla pagina web personale e nel curriculum vitae indicati nella scheda.
Informazioni sul docente
DocenteTurri Stefano Ettore Romano
QualificaProfessore ordinario a tempo pieno
Dipartimento d'afferenzaDipartimento di Chimica, Materiali e Ingegneria Chimica "Giulio Natta"
Settore Scientifico DisciplinareING-IND/22 - Scienza E Tecnologia Dei Materiali
Curriculum VitaeScarica il CV (349.39Kb - 02/09/2019)
OrcIDhttps://orcid.org/0000-0001-8996-0603

Contatti
Orario di ricevimento
DipartimentoPianoUfficioGiornoOrarioTelefonoFaxNote
------LunedìDalle 12:00
Alle 13:00
----Chiedere sempre conferma via telefono o email
E-mailstefano.turri@polimi.it
Pagina web redatta a cura del docente--

Fonte dati: RE.PUBLIC@POLIMI - Research Publications at Politecnico di Milano

Elenco delle pubblicazioni e dei prodotti della ricerca per l'anno 2019 (Mostra tutto | Nascondi tutto)
Tipologia Titolo Pubblicazione/Prodotto
Articoli su riviste
Lignin-Based Anticorrosion Coatings for the Protection of Aluminum Surfaces (Mostra >>)
Two-step fractionation of a model technical lignin by combined organic solvent extraction and membrane ultrafiltration (Mostra >>)
Biobased Polyurethane Coatings with High Biomass Content: Tailored Properties by Lignin Selection (Mostra >>)
Human subjective response to aluminum coating surfaces (Mostra >>)
Contributi su volumi (Capitolo o Saggio)
Polymer Nanostructuring by Two-Photon Absorption (Mostra >>)
Poster
Multi-step fractionation as a tool for enhanced valorization of technical lignins (Mostra >>)
Development of new bio-based lignin polyurethane coatings (Mostra >>)
Multi-step fractionation as a tool for enhanced valorization of technical lignins: a model study (Mostra >>)
Tailored lignin-based polyurethane coatings with a high biomass content (Mostra >>)


Elenco delle pubblicazioni e dei prodotti della ricerca per l'anno 2018 (Mostra tutto | Nascondi tutto)
Tipologia Titolo Pubblicazione/Prodotto
Articoli su riviste
Biotinylated Photopolymers for 3D-Printed Unibody Lab-on-a-Chip Optical Platforms (Mostra >>)
4D printed thermally activated self-healing and shape memory polycaprolactone-based polymers (Mostra >>)
Fractionation of Soda Pulp Lignin in Aqueous Solvent through Membrane-Assisted Ultrafiltration (Mostra >>)
A deep insight into the intrinsic healing mechanism in ureido-pyrimidinone copolymers (Mostra >>)
Fully Biobased Polyesters Based on an Isosorbide Monomer for Coil Coating Applications (Mostra >>)
Development and Life Cycle Assessment of Polyester Binders Containing 2,5-Furandicarboxylic Acid and Their Polyurethane Coatings (Mostra >>)
Lignin Functionalized with Succinic Anhydride as Building Block for Biobased Thermosetting Polyester Coatings (Mostra >>)
Contributi su volumi (Capitolo o Saggio)
Photopolymers for Third-generation Solar Cells (Mostra >>)


Elenco delle pubblicazioni e dei prodotti della ricerca per l'anno 2017 (Mostra tutto | Nascondi tutto)
Tipologia Titolo Pubblicazione/Prodotto
Articoli su riviste
Fluorescent probes based on chemically-stable core/shell microcapsules for visual microcrack detection (Mostra >>)
Stereolithography of perfluoropolyethers for the microfabrication of robust omniphobic surfaces (Mostra >>)
UV-curable fluoropolymers crosslinked with functional fluorescent dyes: The way to multifunctional thin-film luminescent solar concentrators (Mostra >>)
UV-assisted three-dimensional printing of polymer nanocomposites based on inorganic fillers (Mostra >>)
Lignin nanoparticles by ultrasonication and their incorporation in waterborne polymer nanocomposites (Mostra >>)
Combining stereolithography and replica molding: On the way to superhydrophobic polymeric devices for photovoltaics (Mostra >>)
Development of polyester binders for the production of sustainable polyurethane coatings: Technological characterization and life cycle assessment (Mostra >>)
Effect of 3D-Printed Microvascular Network Design on the Self-Healing Behavior of Cross-Linked Polymers (Mostra >>)
Contributo in Atti di convegno
Crosslinking UV-curable polymers with organic dyes for highly stable, multifunctional, light-harvesting luminescent solar concentrators (Mostra >>)
Abstract in Atti di convegno
LIGNIN VALORIZATION: FROM MOLECULES TO MATERIALS (Mostra >>)
Lignin-based nanofillers for bio-based thermoplastic polymer nanocomposites (Mostra >>)
Poster
Fractionation: an essential tool for lignin valorization (Mostra >>)
Nanoparticles from softwood kraft lignin as bio-derived fillers in polymer-based nanocomposites (Mostra >>)
Photocatalytic pre-treatment for lignin enzymatic depolymerization (Mostra >>)
Fractionation: an essential tool for lignin valorization (Mostra >>)
Chemo-enzymatic depolymerization of lignin (Mostra >>)


Elenco delle pubblicazioni e dei prodotti della ricerca per l'anno 2016 (Mostra tutto | Nascondi tutto)
Tipologia Titolo Pubblicazione/Prodotto
Articoli su riviste
Direct photo-patterning of hyaluronic acid baits onto a fouling-release perfluoropolyether surface for selective cancer cells capture and immobilization (Mostra >>)
Nonlinear optical properties of intriguing Ru σ-acetylide complexes and the use of a photocrosslinked polymer as a springboard to obtain SHG active thin films (Mostra >>)
The role of sol–gel chemistry in the low-temperature formation of ZnO buffer layers for polymer solar cells with improved performance (Mostra >>)
A New Design Paradigm for Smart Windows: Photocurable Polymers for Quasi-Solid Photoelectrochromic Devices with Excellent Long-Term Stability under Real Outdoor Operating Conditions (Mostra >>)
Polymeric materials for long-term durability of photovoltaic systems (Mostra >>)
Fractionation of Industrial Softwood Kraft Lignin: Solvent Selection as a Tool for Tailored Material Properties (Mostra >>)
3D-printable CFR polymer composites with dual-cure sequential IPNs (Mostra >>)
UV-Assisted 3D Printing of Glass and Carbon Fiber-Reinforced Dual-Cure Polymer Composites (Mostra >>)
Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers (Mostra >>)
Luminescent Downshifting by Photo-Induced Sol-Gel Hybrid Coatings: Accessing Multifunctionality on Flexible Organic Photovoltaics via Ambient Temperature Material Processing (Mostra >>)
3D Printing of Cantilever-Type Microstructures by Stereolithography of Ferromagnetic Photopolymers (Mostra >>)
Heparin micropatterning onto fouling-release perfluoropolyether-based polymers via photobiotin activation (Mostra >>)
Contributo in Atti di convegno
Fluoropolymeric luminescent downshifting layers for improved performance of flexible polymer solar cells (Mostra >>)
Rivestimenti sol-gel ibridi fotoreticolabili a temperatura ambiente per luminescent downshifting su celle solari polimeriche flessibili (Mostra >>)
Abstract in Atti di convegno
Photopolymers as Emerging Advanced Materials for Sustainable Conversion and Storage Energy Devices (Mostra >>)


Elenco delle pubblicazioni e dei prodotti della ricerca per l'anno 2015 (Mostra tutto | Nascondi tutto)
Tipologia Titolo Pubblicazione/Prodotto
Articoli su riviste
Surface properties and anti-fouling assessment of coatings obtained from perfluoropolyethers and ceramic oxides nanopowders deposited on stainless steel (Mostra >>)
Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling (Mostra >>)
AFM nanomechanical properties and durability of new hybrid fluorinated sol-gel coatings (Mostra >>)
A biomimetic surface treatment to obtain durable omniphobic textiles (Mostra >>)
Multifunctional luminescent down-shifting fluoropolymer coatings: A straightforward strategy to improve the UV-light harvesting ability and long-term outdoor stability of organic dye-sensitized solar cells (Mostra >>)
Roll-to-roll compatible flexible polymer solar cells incorporating a water-based solution-processable silver back electrode with low annealing temperature (Mostra >>)
Polyurethane coatings based on chemically unmodified fractionated lignin (Mostra >>)
Performance and stability improvements for dye-sensitized solar cells in the presence of luminescent coatings (Mostra >>)
Thin-film luminescent solar concentrators: A device study towards rational design (Mostra >>)
Interactions between structural and chemical biomimetism in synthetic stem cell niches (Mostra >>)
Effect of the plasticizer on the self-healing properties of a polymer coating based on the thermoreversible Diels-Alder reaction (Mostra >>)
Recensioni su riviste
Editorial Smart & Functional Coatings Conference 2014 (Mostra >>)
Contributi su volumi (Capitolo o Saggio)
Light-cured Luminescent Coatings for Photovoltaic Devices (Mostra >>)
Abstract in Atti di convegno
Water-based reactive silver ink for flexible polymer solar cells and its interaction with the polymeric hole-transporting layer (Mostra >>)
Multifunctional downshifting polymeric coatings for highly stable and efficient organic dye-sensitized solar cells (Mostra >>)
Poster
Breaking lignin: blue and yellow laccases for a green chemistry (Mostra >>)
Esposizione
Human Centred Design of engineered surfaces and coatings (Mostra >>)
manifesti v. 3.1.9 / 3.1.9
Area Servizi ICT
22/11/2019